Residential & Commercial services

Utah County, UT

Electrical repair and installs in Utah County, UT

Outlet and switch repairs, new lighting and ceiling fans, breakers that keep tripping, panel upgrades and EV charger circuits for homes in southern Utah County, including Payson, Salem, Santaquin and Goshen. Text us and a vetted electrician is assigned.

Text us for service: (385) 217-2973Book online

Text or call our AI to book a pro: (385) 217-2973

Book, track and pay in your browser — no app needed

At a glance

Pros on VendorTap
3 vetted electrical pros serve Utah County, UT.
Rating
5.0★ across 3 rated jobs by these pros on VendorTap.
Completed jobs
6 electrical jobs completed in Utah County, UT through VendorTap.
ZIP codes covered
84526, 84626, 84628, 84629, 84633, 84651, 84653, 84655
How to book
Text or call (385) 217-2973 to book. An AI assistant takes the details and a vetted pro is assigned.

Electrical jobs we book in southern Utah County

Most electrical requests from this end of the county are one of a handful of jobs. Here is what each one usually involves.

  • Outlets and switches: a dead outlet, a switch that sparks or feels warm, worn receptacles that no longer grip a plug, or two-prong outlets you want replaced. A dead outlet is often downstream of a tripped GFCI in another room, so press the reset buttons in the bathrooms, kitchen, garage and outside first.
  • GFCI protection: kitchens, bathrooms, garages, laundry areas, unfinished basements and outdoor outlets are where current code expects ground-fault protection. Older homes often have none in the garage or outside.
  • Lighting and ceiling fans: new fixtures, recessed lights, a fan where a light used to hang (the box must be rated to carry a fan), dimmers and smart switches, many of which need a neutral wire in the box.
  • Breakers that keep tripping: an overloaded circuit, with space heaters the usual winter culprit, a short in a device or cord, or a worn-out breaker. The electrician traces which one it is before replacing anything.
  • Panel upgrades: replacing an old or full panel with one that has room for new circuits, often ahead of a basement finish, a remodel, a heat pump or an EV charger.
  • EV chargers and 240-volt circuits: a dedicated circuit for a Level 2 charger, a hot tub, a welder or shop tools, with the wire gauge and breaker matched to the load.

What electrical work costs in southern Utah County

VendorTap’s estimate range for a typical electrical job is $350–$690, built from the prices of jobs booked through VendorTap. It is the same range our free estimate tool shows, and your actual price depends on the job.

A single outlet, switch or fixture swap sits at the low end. Tracing a fault that comes and goes takes longer, a new circuit adds a wire run and a breaker, and a panel upgrade or a feeder to a shop is a larger quote; ask whether it covers the permit and the utility’s reconnect.

Finished walls and ceilings add time, because the wire has to be fished through them. A photo of the panel label and of the spot where the work goes helps the pro price it.

Shops, barns and outbuildings

Lots in Payson, Salem, Santaquin and Goshen tend to be bigger than up the valley, and many come with a detached garage, a shop, a barn or a well pump. Running power out to one means a feeder sized for what you will use there, a trench at the depth code calls for, and often a small subpanel in the building. Tell us what it is for (lights and a freezer, or a welder and a compressor) and how far it sits from the house; those two answers decide most of the cost.

Outdoor circuits take a beating here. Outlet covers crack after a few summers of sun and winters of frost, while heat tape, engine block heaters and holiday lights load circuits all winter. A weatherproof in-use cover and a GFCI on every outdoor outlet are inexpensive fixes.

Know who supplies your power

Southern Utah County is not all on one utility. Some cities here, Payson among them, run their own municipal power company, while other homes are served by Rocky Mountain Power. A panel upgrade or a new service means the utility disconnects and reconnects the meter on its own schedule, so look at whose name is on your power bill before you book.

If a line is down or the whole street is dark, that is the utility’s job: call them, not an electrician.

Permits and checking an electrician

A panel upgrade, a new circuit or a new service generally needs a permit and an inspection from your city or the county building department. Swapping a fixture or an outlet on an existing circuit usually does not. Ask whether the permit is in the quote.

Electrical contracting in Utah is licensed work. Ask the electrician for a license number before work begins and search it on the Utah Division of Professional Licensing (DOPL) website, dopl.utah.gov. Electricians booked through VendorTap are vetted first, and checking the license yourself still takes only a moment.

When it should not wait

A burning or hot-plastic smell, an outlet or switch plate that is warm to the touch, scorch marks, or lights that dim hard whenever an appliance starts are all reasons to act now. Switch off the breaker for that circuit if you can reach it safely, stop using it, and text us. If you see smoke or flames, get everyone out and call 911.

How booking works

Text or call (385) 217-2973 with what is happening, your ZIP and, if you can, a photo of the outlet, the fixture or the open panel with its label. The assistant asks what an electrician needs to know (which rooms are out, what was running when it tripped, roughly how old the house is), then books a vetted electrician who works in your ZIP. Scheduling, chat and the invoice live together in the app.

Also in Utah County, UT

Electrical in other areas

Questions

How do I book a electrical pro in Utah County, UT?

Text or call (385) 217-2973 to book. An AI assistant takes the details and a vetted pro is assigned.

How many electrical pros does VendorTap work with in Utah County, UT?

3 vetted electrical pros serve Utah County, UT, rated 5.0★ across 3 rated jobs. You text VendorTap and a vetted pro is assigned.

Which ZIP codes in Utah County, UT are covered?

84526, 84626, 84628, 84629, 84633, 84651, 84653, 84655

How do I find a local electrician in Utah County?

Text or call (385) 217-2973 with the job and your ZIP. A vetted electrician who covers your part of the county is assigned, and you can look up their license on dopl.utah.gov before the work starts.

Why does my breaker keep tripping?

Usually too much load on one circuit, such as a space heater and a hair dryer running together, or a fault in a device or cord. Unplug what is on that circuit and reset it once; if it trips again with nothing running, text us.

Can I get an EV charger installed in Payson, Salem or Santaquin?

Text us the charger model and a photo of your panel. A Level 2 charger needs a dedicated 240-volt circuit, and whether your panel has room for one decides most of the cost.

Do I need a permit for an electrical panel upgrade in Utah?

Generally yes. A panel upgrade, a new service or a new circuit is permitted, inspected work; ask the electrician to include the permit in the quote.

Text us what you need

Describe the job and your ZIP code. We take it from there.

Prefer the app?

Book, track and pay for jobs in the VendorTap app.